St45.8 boiler pipe

-

St45.8 boiler pipe decarbonization and oxidation


Based on the comprehensive achievements of science, technology and practical experience, the quality of St45.8 boiler pipe can be improved to meet the needs of manufacture and design of high pressure boiler. Katalor has the rich experience in the St45.8 boiler pipe. We have been worked in St45.8 boiler pipe for more than 10 years.


When the St45.8 boiler pipe is heated, the surface carbon reacts with oxygen, hydrogen, carbon dioxide and water vapor in the medium (or atmosphere), which reduces the surface carbon concentration called decarbonization, and decreases the surface hardness, fatigue strength and wear resistance of the St45.8 boiler pipe after quenching. Moreover, the St45.8 boiler pipe residual tensile stress on the surface is easy to form a network crack on the surface. When heated, the reaction of iron and alloys with elements and oxygen, carbon dioxide and water vapor in the medium (or atmosphere) to form oxide films is called oxidation. The dimension precision and surface brightness of the workpiece oxidized at high temperature (generally 570℃ or above) deteriorate, and the St45.8 boiler pipe parts with poor hardenability of oxygen film are easy to be used. A quenching soft spot appears. Measures to prevent St45.8 boiler pipe oxidation and reduce decarbonization include: coating on workpiece surface, sealed heating with stainless steel foil, heating in salt bath furnace, heating in protective atmosphere (such as purified inert gas, controlling carbon potential in furnace), A flame-burning furnace, ie one that causes the gas to be reductive.

Please contact us if you have any need in St45.8 boiler pipe, we will reply you as soon as possible. And we can supply the St45.8 boiler pipe with high quality and different size to meet your any requirements. Of course we can solve your any confusion about St45.8 boiler pipe. Welcome to cooperate with us.

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文

EN 10025-2 S235J0 channel steel

-
图片
How to storage the EN 10025-2 S235J0 channel steel correctly Generally, the storage of Katalor EN 10025-2 S235J0 channel steel will be placed in the storehouse. Although this environment is favorable to its storage, it should be noted that EN 10025-2 S235J0 channel steel quality will also be affected by its placing method. Therefore, when placing EN 10025-2 S235J0 channel steel, there are several things to pay attention to: First, the same type of EN 10025-2 S235J0 channel steel is stacked separately according to the order of storage, so as to facilitate the implementation of the principle of advanced first issue. Moreover, the principle of stacking requires that under the conditions of stable palletizing and ensuring safety, the stacking should be carried out according to varieties and specifications. Different materials of EN 10025-2 S235J0 channel steel should be palletized separately to prevent confusion and mutual corrosion. Second, the stacking he
阅读全文