stainless steel plate in Katalor

-

Elemental Ni has the significant role in JIS G4304 SUS 420J1 steel plate


JIS G4304 SUS 420J1 steel plate has certain wear resistance and corrosion resistance, high hardness. JIS G4304 SUS 420J1 steel plate price is the lower class of stainless steel ball. Instruments, transportation tools, household appliances, etc. JIS G4304 SUS 420J1 steel plate is used in the manufacture of parts resistant to atmospheric, steam, water and oxidizing acid corrosion.


The addition of element Ni and the increase of Ni content lead to the increase of thermodynamic stability of SUS420J1 alloy, so SUS420J1 alloy has better properties of rust and oxidation resistant medium.

With the increase of Ni content, the performance of the reductive medium of SUS420J1 alloy is further improved. It is worth pointing out that nickel is the only important element to improve the stress corrosion of many medium of SUS420J1 alloy. 



Nickel also improves the high temperature oxidation resistance of SUS420J1 alloy, which is mainly related to the improvement of the composition, structure and properties of chromium oxide film. The higher the nickel content is, the more harmful it is, which is mainly due to the low melting point nickel sulfide at grain boundary in the steel.


We can find that elemental has the significant role in JIS G4304 SUS 420J1 steel plate. So if you have any requirements of the JIS G4304 SUS 420J1 steel plate, please contact us. We are glade to solve your any questions about the JIS G4304 SUS 420J1 steel plate. Welcome to cooperate with Katalor!

if you have any needs of  JIS G4304 SUS 420J1 steel plate, please click following websites or send email to us!

websites: www.katalor.com
                www.bsteel.com
email: info@katalor.com
           katalorsteels@gmail.com
                

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

20G boiler steel pipe

-
图片
Boiler operation status of the GB/T 5310 20G boiler steel pipe  Some steel companies produce the fake 20G boiler steel pipe cause the huge problems. Because the creep resistance of 20G boiler steel pipe is lower than other steel pipes and the 20G boiler steel pipe is overheated, the 20G boiler steel pipe wall metal overheated for a long time, which results in accelerated creep at high temperature, decreased strength, and finally the early creep burst occurred. During 20G boiler steel pipe fracture analysis, it was found that the macroscopic surface of the 20G boiler steel pipe fracture was covered with thin blue-purple oxide film, which indicated that the temperature of the 20G boiler steel pipe burst was 800℃, and the section was not smooth due to the effect of high temperature oxidation. There is a thick oxide layer on the inner surface of the  20G boiler steel pipe . The structure of the oxide layer has three layers and usually only when the ambient temperature
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文