GB4237 1Cr17 FERRITE stainless steel sheet

-

GB4237 1Cr17 FERRITE stainless steel sheet tensile strength is greater than 450, 1Cr17 yield strength is greater than 205, and the HBS is less than 183 (data is annealed). 1Cr17 FERRITE stainless steel sheet Often used as architectural decoration, heavy oil burner parts, etc. The composition of GB4237 1Cr17 FERRITE stainless steel sheet is characterized by high chromium and low carbon, and the structure is single-phase ferrite.

The application of GB4237 1Cr17 FERRITE stainless steel sheet

1.A general-purpose steel with good corrosion resistance. Used in interior decoration, heavy oil 2.burner parts, household appliances and household appliance parts.
3.Decorative materials and outdoor advertising billboards;
4.For products with stress corrosion resistance requirements;
5.Electronics, cutlery, bolts, nuts, screens and burners.
Tolerance: according to relevant standard
Surface: No.1

GB4237 1Cr17 FERRITE stainless steel sheet Heat treatment

Annealing at 780 ~ 850 ° C air cooling or slow cooling.
GB4237 1Cr17 FERRITE stainless steel sheet Corresponding national brand
Corresponding Japanese brand: SUS430
Corresponding to the German brand: X8CR17
Corresponding to the US brand: CB30
Corresponding to the British brand: 430Si5
Corresponding to the French brand: Z8C17

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

20G boiler steel pipe

-
图片
Boiler operation status of the GB/T 5310 20G boiler steel pipe  Some steel companies produce the fake 20G boiler steel pipe cause the huge problems. Because the creep resistance of 20G boiler steel pipe is lower than other steel pipes and the 20G boiler steel pipe is overheated, the 20G boiler steel pipe wall metal overheated for a long time, which results in accelerated creep at high temperature, decreased strength, and finally the early creep burst occurred. During 20G boiler steel pipe fracture analysis, it was found that the macroscopic surface of the 20G boiler steel pipe fracture was covered with thin blue-purple oxide film, which indicated that the temperature of the 20G boiler steel pipe burst was 800℃, and the section was not smooth due to the effect of high temperature oxidation. There is a thick oxide layer on the inner surface of the  20G boiler steel pipe . The structure of the oxide layer has three layers and usually only when the ambient temperature
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文