SA106B boiler steel pipe

-

Main technical requirements of welded SA106B boiler steel pipe 


The high quality SA106B boiler steel pipe should have an important main technical requirements. Katalor is a professional SA106B boiler steel pipe supplier in China. We work on SA106B boiler steel pipe for more than 10 years, so we have rich experience. 


1. Stable high temperature rupture strength, plastic and creep strength. The SA106B boiler steel pipe work under certain temperature and pressure, and the technical indexes under certain temperature should have certain stability.

2. SA106B boiler steel pipe with certain oxidation resistance and corrosion resistance.

3. Good process performance, such as SA106B boiler steel pipe welding performance and good flattening, flaring, cold bending, easy to process and manufacture.

4. Good internal and external surface quality and dimensional accuracy in SA106B boiler steel pipe.

5. Good SA106B boiler steel pipe weld quality. In order to ensure the weld quality, the quality requirement of the SA106B boiler steel pipe raw material for welded pipe is even higher than that of seamless steel pipe, for example, the control of miscellaneous quality and gas content is more strict.

6. The cleaning requirements for internal and external burr of weld seam are more strict, and the SA106B boiler steel pipe residual height and indentation should be controlled within 0. 15 mm.

Do you have any requirements about SA106B boiler steel pipe? We can supply SA106B boiler steel pipe with high quality and best price. To meet customers’ requirements, we have SA106B boiler steel pipe with different sizes. You can contact freely. We will offer the more information about SA106B boiler steel pipe.

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

20G boiler steel pipe

-
图片
Boiler operation status of the GB/T 5310 20G boiler steel pipe  Some steel companies produce the fake 20G boiler steel pipe cause the huge problems. Because the creep resistance of 20G boiler steel pipe is lower than other steel pipes and the 20G boiler steel pipe is overheated, the 20G boiler steel pipe wall metal overheated for a long time, which results in accelerated creep at high temperature, decreased strength, and finally the early creep burst occurred. During 20G boiler steel pipe fracture analysis, it was found that the macroscopic surface of the 20G boiler steel pipe fracture was covered with thin blue-purple oxide film, which indicated that the temperature of the 20G boiler steel pipe burst was 800℃, and the section was not smooth due to the effect of high temperature oxidation. There is a thick oxide layer on the inner surface of the  20G boiler steel pipe . The structure of the oxide layer has three layers and usually only when the ambient temperature
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文