15Mo3 boiler pipe

-

The principle of the 15Mo3 boiler pipe


Everyone know the 15Mo3 boiler pipe is under the standard of the DIN 17175. Of course 15Mo3 boiler pipe is mainly product in Katalor. We have own mill to produce the 15Mo3 boiler pipe with high quality. We will introduce the principle of 15Mo3 boiler pipe for you.


Stay under 300-500 ℃, the purified hydrogen bubbled into 15Mo3 boiler pipe side, the hydrogen adsorption in 15Mo3 boiler pipe wall, as a result of the palladium 4 d shell lack of two electrons, it can generate unstable with hydrogen bonds (palladium and the reaction is reversible hydrogen), under the action of palladium, ionized hydrogen protons as the radius of 1.5 x 1015m, while palladium lattice constant of 3.88 x 10-10m (20℃), it can through 15Mo3 boiler pipe, under the action of palladium protons combined with electrons to form hydrogen molecules, Escape from the other side of the 15Mo3 boiler pipe.


On the surface of steel tube of 15Mo3 boiler pipe, the undissociated gas cannot pass through, so high purity hydrogen can be obtained by using steel tube of 15Mo3 boiler pipe. 

Although palladium has unique permeability to hydrogen, its mechanical properties are poor, and it is easy to be oxidized at high temperature and recrystallized at low temperature. Therefore, it is easy to deform and brittle the steel pipe of 15Mo3 boiler pipe.


Pleas contact us if you have any need in 15Mo3 boiler pipe, we can supply the 15Mo3 boiler pipe with high-quality and good after-sale service for you. And we will reply you about 15Mo3 boiler pipe detail information for you as soon as possible.

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

20G boiler steel pipe

-
图片
Boiler operation status of the GB/T 5310 20G boiler steel pipe  Some steel companies produce the fake 20G boiler steel pipe cause the huge problems. Because the creep resistance of 20G boiler steel pipe is lower than other steel pipes and the 20G boiler steel pipe is overheated, the 20G boiler steel pipe wall metal overheated for a long time, which results in accelerated creep at high temperature, decreased strength, and finally the early creep burst occurred. During 20G boiler steel pipe fracture analysis, it was found that the macroscopic surface of the 20G boiler steel pipe fracture was covered with thin blue-purple oxide film, which indicated that the temperature of the 20G boiler steel pipe burst was 800℃, and the section was not smooth due to the effect of high temperature oxidation. There is a thick oxide layer on the inner surface of the  20G boiler steel pipe . The structure of the oxide layer has three layers and usually only when the ambient temperature
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文