EN 10025-2 S235J0 channel steel

-

How to storage the EN 10025-2 S235J0 channel steel correctly



Generally, the storage of Katalor EN 10025-2 S235J0 channel steel will be placed in the storehouse. Although this environment is favorable to its storage, it should be noted that EN 10025-2 S235J0 channel steel quality will also be affected by its placing method. Therefore, when placing EN 10025-2 S235J0 channel steel, there are several things to pay attention to:

First, the same type of EN 10025-2 S235J0 channel steel is stacked separately according to the order of storage, so as to facilitate the implementation of the principle of advanced first issue. Moreover, the principle of stacking requires that under the conditions of stable palletizing and ensuring safety, the stacking should be carried out according to varieties and specifications. Different materials of EN 10025-2 S235J0 channel steel should be palletized separately to prevent confusion and mutual corrosion.

Second, the stacking height of EN 10025-2 S235J0 channel steel is not more than 1.2 m for manual operation, 1.5 m for mechanical operation, and 2.5 m for stack width. And there should be a certain passage between the stack and the stack, the inspection channel is generally 0.5 m, and the access channel depends on the size of the material and the transport machinery, generally 1.5-2.0 m. If the EN 10025-2 S235J0 channel steel warehouse is the morning sun cement ground, the cushion height can be 0.1 m; if it is mud, it must be 0.2-0.5 m high. If it is an open pit, the sand and mud cushion is 0.5-0.7m.

Thirdly, it is forbidden to store the corrosive articles near the EN 10025-2 S235J0 channel steel, and the bottom of the stack should be padded high, strong and flat to prevent the EN 10025-2 S235J0 channel steel from damp or deformation.

We can supply EN 10025-2 S235J0 channel steel with high quality and best after-sale service. So you can contact us freely if you have any requirement in EN 10025-2 S235J0 channel steel. We will try our best to supply EN 10025-2 S235J0 channel steel according your require.

评论

发表评论

此博客中的热门博文

ASTM A517 steel belongs to the boiler steel plate

-
ASTM A517 steel (also called ASME SA517 standard) is a kind of high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Under this specification, the plate thickness determines the grade selection and the mechanical properties.   A517 grade A steel pates 2.5" in thickness and under, will have minimum Yield Strength of 100 ksi.  A517 grade b steel plates over 2.5" in thickness will have a minimum Yield strength of 90 ksi.  Typical applications include unfired vessels and tanks. ASTM A517 Grade A plates are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. A plate may be ordered normalized or stress relieved, or both. ASTM A517 Grade H are Pressure Vessel Plate and supplied in the as-rolled condition. The ASTM A517 Gr. H Plate may be ordered normalized or stress relieved, or both. AS
阅读全文

20G boiler steel pipe

-
图片
Boiler operation status of the GB/T 5310 20G boiler steel pipe  Some steel companies produce the fake 20G boiler steel pipe cause the huge problems. Because the creep resistance of 20G boiler steel pipe is lower than other steel pipes and the 20G boiler steel pipe is overheated, the 20G boiler steel pipe wall metal overheated for a long time, which results in accelerated creep at high temperature, decreased strength, and finally the early creep burst occurred. During 20G boiler steel pipe fracture analysis, it was found that the macroscopic surface of the 20G boiler steel pipe fracture was covered with thin blue-purple oxide film, which indicated that the temperature of the 20G boiler steel pipe burst was 800℃, and the section was not smooth due to the effect of high temperature oxidation. There is a thick oxide layer on the inner surface of the  20G boiler steel pipe . The structure of the oxide layer has three layers and usually only when the ambient temperature
阅读全文

S235JR steel plate

-
图片
Katalor has more useful S235JR steel plate information S235JR steel plate  is a kind steel grade and it is mainly used for steel structural buildings, frames and other steel body under the standard of EN 10025-2.  S235JR steel plate  is for low temperature impacting test under zero centigree. Katalor steel Industrial specialized in S235JR steel plate  in china many decades years. The composition characteristics of S235JR steel plate  are low carbon, less than 0.20%, low alloy and total alloy element less than 3%. Low carbon content in S235JR steel plate  steel is to meet the technical requirements of plasticity, toughness, weldability and cold deformation of S235JR steel plate  used for engineering structural parts. The S235JR steel plate  has Mn as the main additive and conforms to the resource characteristics of our country. Mn not only has a significant strengthening effect on ferrite , but also reduces the cold and brittle temperature of the S235JR steel plate , and
阅读全文